Birmingham Water Heater Maintenance in 10 Minutes

Posted by on Feb 25, 2014 in Water Heater Repair Birmingham

We are going to put you to work today, but only for about 10 minutes. Yep, that’s all it will take for these two important water heater upkeep jobs; however, Water Heater Repair Birmingham understands they will do an exceptional task of helping with 3 things:
Having your water heater last as long as possible (that will conserve you cash).
Making sure the water heater runs securely (we do not want it to blow up).
Having it run as energy efficiently as possible (also saving you cash).

So with that in mind, are you prepared to invest ten minutes once or two times a year to assist in saving some money? Water Heater Repair Birmingham AL thought so.

Testing the T&P Relief Valve

Typically called the T&P Valve, or the temperature and pressure relief valve, has a crucial job. It helps make sure excess pressure does not build up inside the water storage tank, or in even more easy terms, it makes sure the water heater does not explode. As the photo shows, it has a lever or little deal with on it. All you need to do is lift it part means then let go of it. Hopefully, it snapped back to its shut position rapidly. If it is working effectively, a little water can be heard going into the drain pipe below the lever you just lifted and you possibly heard some pressure being released. If none of these things have actually occurred throughout the test, the valve will have to be replaced.

Carry out a Mimi Water Heater Tank Flush

By nature, rust and corrosion will occur inside the water storage tank thanks to the chemical reactions taking place with all the elements inside that are needed to heat up the water. We will not get overly technical here, but it is easy to assist prevent this process by doing a flush or draining of all or some of the water in the tank.

For simply a small flush, position a container under the drain valve below the tank. Open the drain valve and fill up the pail with water. Drain a minimum of a few gallons of water in all. Let the water sit in the pail for a couple of minutes to settle and examine if there is much that settles to the bottom of the container. If there is, if the water heater has not been drained for a very long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature dial down and could wish to let the water cool off for about an hour first so it is not too hot while draining it. Also, it would be simpler to attach a hose to the drain valve and let the water go outside instead of utilizing containers.

If the water looks fairly clean and clear from the mini test you should be all set. When the water heater has a large amount of sediment inside of it, it can make loud popping sounds and it reduces its efficiency too.

Though water heaters are fairly upkeep free and easy to operate, any time you feel the tiniest awkward or are not sure of exactly what to do, it is always best to have a plumbing professional help with the situation.

Water Heater Repair Birmingham